Affinity Devin Pelphy Signature Red Oversized SCS Scooter T Bars

Affinity Devin Pelphy Signature Red Oversized SCS Scooter T Bars are some of the most desired bars out, with their massive 28" height and 25" width and beautifully finished red coating. 

The Ride Affinity Classic T bar boasts a thick .083” Crossbar. By using this thickness the bar is able to maintain strength while enabling that classic T bar look. The steerer tube is a .058 thick” and fits nicely on most compression systems. This combination of wall thicknesses and quality welding creates a superior T bar.

The bar is protected with a high quality coat of gloss paint to protect the Chromoly Steel from rusting and it creates a look unique to Affinity. If you’re looking for a high quality T bar that will last then look no further. Affinity is the right choice for you.

Specification, Compatibility & Technical Details:

• Compatible Compression Types (see important note below): SCS
• Bar Height: 710mm / 28 inches
• Bar Width: 630mm / 25 inches
• Material: Chromoly Steel
• Outer Diameter: Oversized (34.9mm)
• Inner Diameter: Oversized (32mm)
• Slit Cut out: No
• Weight: 1400 grams
• Backsweep: No
• Recommended Clamp Size: SCS

Important Note: Compatibility of your existing scooter with these bars cannot be guaranteed, but we can advise you below on how to make sure they are!

Make sure you’re aware what compression type you want or have on your existing scooter. For both HIC and IHC compression a slit is needed in the bottom of the bar to fit, these may come already done, or you can cut them yourself on purchase, see Youtube for how.

For SCS Bars, there should be no slit, if the bars you’re looking to buy do have a slit, you’ll need to cut the ends off and remove the slit or have an SCS sleeve/bung fitted.

Bars that have been modified invalidate warranty, returns or exchanged. If you have any doubt about compatibility call (+441794 830005) or email (sales@skates.co.uk) prior to buying.