Blazer Pro Rebellion Black SCS/HIC Scooter Bar – 700mm x 650mm

The Blazer Pro Rebellion Scooter T bar is made from solid 4130 Chromoly and measures up at 700mm high and 650mm wide making them BlazerPro’s biggest bars to date. The ovalised tubing at the weld point increases the connection area resulting in a stronger and more sturdy bar.

Specification, Compatibility & Technical Details:

• Compatible Compression Types (see important note below): HIC & can also work with SCS Compression if you cut off the slit at the bottom of the Bars
• Bar Height: 700mm / 27.5 inches
• Bar Width: 650mm / 25.5 inches
• Material: Chromoly Steel
• Outer Diameter: Oversized (34.9mm)
• Inner Diameter: Oversized (32mm)
• Slit Cut out: Yes
• Weight: 1200 grams
• Backsweep: No
• Recommended Clamp Size: SCS or a Standard Sized Double Clamp if going for IHC Compression

Important Note: Compatibility of your existing scooter with these bars cannot be guaranteed, but we can advise you below on how to make sure they are!

Make sure you’re aware what compression type you want or have on your existing scooter. For both HIC and IHC compression a slit is needed in the bottom of the bar to fit, these may come already done, or you can cut them yourself on purchase, see Youtube for how.

For SCS Bars, there should be no slit, if the bars you’re looking to buy do have a slit, you’ll need to cut the ends off and remove the slit or have an SCS sleeve/bung fitted.

Note: Scooter Bars that have been modified invalidate warranty, returns or exchanged. We therefore cannot cut bars prior to sending them out. If you have any doubt about compatibility message us via livechat, call (+441794 830005) or email (sales@skates.co.uk) prior to buying.