District Cam Ward SCS / IHC Aluminium AL-3 Stunt Scooter Bar - 22" x 25"

The District Cam Ward SCS / IHC Aluminium AL-3 Stunt Scooter Bar - 22" x 25" is Cam Ward's personal signature bars.

At an extremely light 760 grams, and armed with a double gusset design for strength, these bars are perfect for any rider wanting a great lightweight scooter setup.

An extra wide bar made of Aluminium with a vertical tube splitting into gussets and two super strong gussets added to reinforce the bar. Light and very strong construction. 

IMPORTANT: Note these bars do not come with a slit, you can cut this if needed for IHC compression, but it comes SCS Ready.

Specification, Compatibility & Technical Details:

• Compatible Compression Types (see important note below): SCS Ready, but can be used for IHC if slit is cut into the bottom of the bars
• Bar Height: 560mm / 22 inches
• Bar Width: 635mm / 25 inches
• Material: Aluminium 6061
• Outer Diameter: Oversized (34.9mm)
• Inner Diameter: Standard (28mm)
• Slit Cut out: No
• Weight: 760 grams
• Backsweep: 1 Degrees
• Recommended Clamp Size:  Any standard oversized clamp for IHC, or any SCS Clamp for SCS compression setup

Important Note: Compatibility of your existing scooter with these bars cannot be guaranteed, but we can advise you below on how to make sure they are!

Make sure you’re aware what compression type you want or have on your existing scooter. For both HIC and IHC compression a slit is needed in the bottom of the bar to fit, these may come already done, or you can cut them yourself on purchase, see Youtube for how.

For SCS Bars, there should be no slit, if the bars you’re looking to buy do have a slit, you’ll need to cut the ends off and remove the slit or have an SCS sleeve/bung fitted.