Drone Relic 2 SCS / IHC Scooter T Bars - Black – 650mm x 600mm

The Drone Relic 2 SCS / IHC Scooter T Bars - Black – 650mm x 600mm  are a huge improvement on the V1. These scooter T bars are TIG welded, and coated with three different finishes and cast from super strong cromoly steel. 

Features:

Specification, Compatibility & Technical Details:

• Compatible Compression Types (see important note below): SCS, but can be used for IHC if slit cut in, or ICS if starnut inserted
• Bar Height: 650mm / 25.6 inches
• Bar Width: 600mm / 23.6 inches
• Material: Chromoly Steel
• Outer Diameter: Standard (31.8mm)
• Inner Diameter: Standard (28mm)
• Slit Cut out: No (can be cut upon receipt)
• Weight: 990 grams
• Backsweep: None
• Recommended Clamp Size: Any SCS Clamp for SCS compression setup or it can be used for IHC If you cut a slit in the bottom of the bars

Important Note: Compatibility of your existing scooter with these bars cannot be guaranteed, but we can advise you below on how to make sure they are!

Make sure you’re aware what compression type you want or have on your existing scooter. For both HIC and IHC compression a slit is needed in the bottom of the bar to fit, these may come already done, or you can cut them yourself on purchase, see Youtube for how.

For SCS Bars, there should be no slit, if the bars you’re looking to buy do have a slit, you’ll need to cut the ends off and remove the slit or have an SCS sleeve/bung fitted.