Drone Relic 2 SCS / IHC Scooter T Bars - Black – 710mm x 600mm
Get More Info on Paypal
The Drone Relic 2 SCS / IHC Scooter T Bars - Black – 710mm x 600mm are a huge improvement on the V1. These scooter T bars are TIG welded, and coated with three different finishes and cast from super strong cromoly steel.
Specification, Compatibility & Technical Details:
- Compatible Compression Types (see important note below): SCS, but can be used for IHC if slit cut in, or ICS if starnut inserted
- Bar Height: 710mm / 28 inches
- Bar Width: 600mm / 23.6 inches
- Material: Chromoly Steel
- Outer Diameter: Standard (31.8mm)
- Inner Diameter: Standard (28mm)
- Slit Cut out: No (can be cut upon receipt)
- Weight: 990 grams
- Backsweep: None
- Recommended Clamp Size: Any SCS Clamp for SCS compression setup or it can be used for IHC If you cut a slit in the bottom of the bars
Important Note: Compatibility of your existing scooter with these bars cannot be guaranteed, but we can advise you below on how to make sure they are!
Make sure you’re aware what compression type you want or have on your existing scooter. For both HIC and IHC compression a slit is needed in the bottom of the bar to fit, these may come already done, or you can cut them yourself on purchase, see Youtube for how.
For SCS Bars, there should be no slit, if the bars you’re looking to buy do have a slit, you’ll need to cut the ends off and remove the slit or have an SCS sleeve/bung fitted.
|Compression||SCS / IHC (If Slit Cut) / ICS (If Starnut Installed)|
|Bar Material||Chromoly Steel|
|Delivery Option||Under £40||Over £40|
|Amazon Shipping 3-5 day||£2.95||FREE|
|Amazon Shipping 1-2 Day||£4.95||£4.95|
Rest of UK
|UK Off Shore Islands||2-3||£5.95|
International Delivery Information
We offer worldwide delivery. This takes 3 to 5 days for most of Europe and is often free with orders over €80.
For information regarding international delivery please click here.
International Delivery Rate Table
We warranty all orders for genuine manufacturing defects up to 30 days from delivery (not damage caused through use). If any issues arise after this time, warranty cover will be passed over to the brands & suppliers we work with. Full details on the warranty period/conditions etc.
Please note, any scooter or other products sold that used in an extreme manner or at a skate park, have limited warranty cover due to the nature of use they are put through. To raise a warranty claim just contact us, with your order number, details of the fault and a photograph/video of the issue to provide sufficient evidence.